Features
High efficiency
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Reset table power shut down
Approved by UL, TUV, CB & CE
INTERNAL 12 VDE fan
Complies with FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation
100% burn-in under high ambient temperature(50¢J)
Vacuum-impregnated transformer
MTBF:100K hours at 25¢J
100% Hi-pot tested
FULL RANGE 100~240VAC

Input Characteristics
Voltage: 95-132 VAC or 180-264 VAC switch able
Frequency: 47 Hz TO 63 Hz
Input current: 10 amps maximum/ 115 Vrms,60 Hz. 5 amps maximum /230 Vrms,50Hz.

Specification
Remote ON/OFF Control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
Temperature range: operating 0¢J~50¢J, storage -20¢J ~ +80¢J
Temperature coefficient: 0.01% / ¢J
Transient response: output voltage recovers in less than 1 ms max. following a 25% load change
Hold-up time: 16ms minimum at full load & nominal input voltage
Dielectric withstand: input / output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second
Humidity: 5~95% RH
Efficiency: 65% min. 70% typical, at full load
Power good signal: turn-on delay 100 ms to 500 ms
Overload protection: 150% max.
Inrush current: 60A cold , 80A ware at 132 VAC
Over voltage protection: +5V output : 6.5V; +3.3V output: 4.6V;+12V output: 15.5V